Home | Bevels | Bevel Clusters | Box Parts | Glue Chip Clusters | Glass Pattern CDs | Glass Books | Caulk
Chemicals  | Clarity Products  | Diamond Heads  | Foil  | Foiling Devices | Hot Glass | Gift Certificate
Glass | Glass Cutters | Grinders | Jewels & Nuggets | Lamp Making | Lead Came | Lead Tools
Morton Systems | Mosaic Supplies | Oak Frames | Pliers | Saws | Soldering Supplies | Miscellaneous | Links

Next Page

FREE SHIPPING on all sales over $285
within contiguous United States only

Due to the high cost of shipping a $2.50 surcharge will be added to all purchases of $25.00 or less.

Shipping Cost:
orders to: $39.99 ...........$8.95
$40 - $59.99 ...........$9.95
$60 - $99.99 ..........$13.95
$100 - $124.99 ..........$15.95
$125 - $174.99 ..........$19.65
$175 - $234.99 .........$24.95
$235 - $284.99 ............$28.95
UPS Ground - No Box Charges

Hawaii, Alaska, APO/FPO, Territories and foreign countries
please call or email Cathedral Stained Glass
( support@cathedralstainedglass.com )

Fusibles 1

Mold & Kiln Accessories

ThinFire Shelf Paper
A heat-resistant, light weight ceramic impregnated paper, ThinFire provides excellent separation between kiln shelf and glass in kiln firing applications up to 1600º. Smooth finish.
Sheet size 20 1/2" x 20 1/2"		 $4.17
Quantity
Fiber Paper
Fiber Paper is a flexible lightweight refractory material. Can be used as a fusing surface to impart a slightly rough finish on the back of glass or as a simple mold if used with a fiber mold hardener.
Sheet size 24" x 24"
Fiber Paper 1/8"
$14.28
Quantity
Fiber Paper 1/32"
$6.75
Quantity
1/2" Fiber Blanket
A flexible material similar to Moist Pak, without the heat-setting rigidizer. Contains no asbestos. Can be used with fiber mold hardener to make simple molds. Great for bent panel repair in lamps, etc.
Sheet size 24" x 24"		 $13.65
Quantity
Fiber Mold Hardener
Used with fiber paper molds - just apply it to the mold, fire to 500ºF and sand the surface, then apply a coat of glass separator.
Quart		 $9.85
Quantity
Kaiser-Lee Board
Easy to cut 12" square by 1" thick for mold making. Does not require mold hardener, can be fired without kiln wash and is re-usable. Great for reliefs or casting.		 $49.00
Quantity
Super Spray
Low-lead overglaze that prevents de-vitrification on kiln-fired glass projects. Safe for food-bearing surfaces. Use on iridescent or dichroic glass, will not discolor reds, oranges and other sensitive colors. Clarifies at 1300ºF.
8oz. container 		$18.00
Quantity

Go back to the Top of the Page

Shelf Primer
Manufactured by Bullseye Glass Co. Each batch is kiln tested to ensure consistency from run to run. Illustrated instructions cover application, drying, mixing, precaution and storage. Five pound bucket of dry mix will coat approximately 150 20" x 20" shelves.		 $19.85
Quantity
Hi-Fire Shelf Primer
High-temperature shelf primer for a smooth finish on all kiln projects. Special formula appears pink before firing and disappears upon firing.
24 oz.		 $8.58
Quantity
Primo Primer
Designed for fusers who fire on the high end of the fusing range: specifically 1500°-1550°F instead of the usual 1425° - 1475°F. The primer turns to a fine powder in this range, allowing the glass to "float". Designed not to stick to the glass or shelf to eliminate scaling on transparents and can be removed from the shelf with a brush or vacuum.
5 lb. tub		 $22.50
Quantity
Graphite Tongs
Graphite tongs for shaping molten glass around molds and other hot glass shaping.		 $24.75
Quantity
Stainless Steel Tongs
Great for shaping the kiln fired bracelets and watches. Tongs are at just the right angle with graphite ends for easy manipulation of the glass.		 $59.95
Quantity

Go back to the Top of the Page

Mold Mix
A non-toxic material that does not contain asbestos. Easy to use and a tremendous time saver over other mold-making products. Mold can be re-used 20-30 times without falling apart (if not undercut).
5 lb. bag		 $26.85
Quantity
Badger Spray Gun Set
Great for overglaze, this air brush set applies liquid evenly without brush strokes. Set contains 350 medium tip air brush with attachable 3/4 oz. jar, air hose, 2oz. jar with cover, 1/4 oz color cup/ Propel regulator, propel can, wrench and instructions.		 $88.65
Quantity
Spray Gun Propellant
Propel propellant 15oz can		 $18.65
Quantity
GlasTac
Glue for glass kiln forming. Hold pieces in place prior to firing. Slow drying allows readjustments as you work. Organic colorant lets you see where you've put it on clear glass. Burns out cleanly in the kiln		 $5.49
Quantity
Hake Brush
The Hake Brush lays down a smooth even coating of glass separator on the kiln shelf or mold, leaving a smooth surface.		 $5.70
Quantity

Go back to the Top of the Page

Fusibles Index Fusibles Page 2